This scenario shows a simple PCI; that is balloon dilatation followed by stent deployment. Imaging catheters (IVUS, OCT, Angioscopy) and FFR are also applicable. Training under X-ray fluoroscopy is more beneficial.
CTO Model
Coronary
This is a chronic total occlusion disease model. It features multiple collateral channels between LAD and RCA, and between LCX and RCA. The LAD, LCX and RCA have their own pockets, so that if the CTO vessel part is set in the RCA pocket, both the antegrade approach from RCA and the retrograde approach from LAD can be simulated, and vice versa.
Occlusion vessels can be selected by changing the position of the replaceable coronary artery part.
Lesion parts [ detachable & disporsable ]
75% stenosis with soft plaque suitable for direct stenting.
75% stenosis with concentric calcification suitable for rotablation.
100% total occlusion easy to pass
100% total occlusion. (Hardness: level 1 to 5)
75% stenosis with concentric calcification suitable for Atherectomy.
75% stenosis with eccentric calcification suitable for Atherectomy.
75% stenosis suitable for IVL
For bail-out scenario “Coronary Rupture”
Suitable for stenting under camera view
Suitable for stenting under X-ray
Calcified lesion for both camera and X-ray
IVUS-visible soft plaque suitable for DCA
- Compatible Operating Procedure
-
Model CAG PCI CABG CTO BIF Coronary angiography (CAG) 〇 〇 〇 〇 〇 PCI/CAG for CABG 〇 Thrombectomy for ACS 〇 〇 〇 IVUS / OCT imaging 〇 〇 〇 〇 Fractal Flow Reserve (FFR) 〇 〇 〇 〇 Stent deployment 〇 〇 〇 〇 Atherectomy (Rotablation/OA) 〇 〇 〇 〇 Intravascular Lithotripsy (IVL) 〇 〇 〇 〇 Directional coronary atherectomy
(DCA)〇 Bifurcation procedure
KBT/Culotte & Crush stenting〇 Chronic total occlusion (CTO) 〇 Coronary rupture (Covered stent) 〇 〇 〇 〇* Coiling for coronary perforation 〇 〇 〇 〇 〇 *for RCA only
- Recommended procedures
-
Stenting (Simple PCI procedure)
Atherectomy (Debulking procedures)
This scenario allows trainees to understand the strategy behind dealing with various lesions, especially severe calcification. With calcified vessel parts, one can practice the debulking technique with Rotablator and Directional Coronary Atherectomy (DCA) devices. Training under X-ray fluoroscopy is more beneficial.
ACS (Thrombectomy, balloon and stenting)
This scenario facilitates emergent PCI strategy including thrombectomy followed by balloon dilatation and stent deployment. In successful case, you can see some thrombus in a syringe along with a nice final angiography.
- Stenting (Simple PCI procedure)
-
This scenario shows a simple PCI; that is balloon dilatation followed by stent deployment. Imaging catheters (IVUS, OCT, Angioscopy) and FFR are also applicable. Training under X-ray fluoroscopy is more beneficial.
- Atherectomy (Debulking procedures)
-
This scenario facilitates emergent PCI strategy including thrombectomy followed by balloon dilatation and stent deployment. In successful case, you can see some thrombus in a syringe along with a nice final angiography.
- ACS (Thrombectomy, balloon and stenting)
-
This scenario facilitates emergent PCI strategy including thrombectomy followed by balloon dilatation and stent deployment. In successful case, you can see some thrombus in a syringe along with a nice final angiography.
- Recommended Bail-out procedures
-
Coiling for coronary perforation
Coronary perforation
Coiling procedure
Successful coiling
Ping-pong technique for coronary rupture
Coronary rupture
Balloon occlusion
Double guide catheter
Ping-pong technique
Covered stent
Successful stenting
- Coiling for coronary perforation
-
Coronary perforation
Coiling procedure
Successful coiling
- Ping-pong technique for coronary rupture
-
Coronary rupture
Balloon occlusion
Double guide catheter
Ping-pong technique
Covered stent
Successful stenting
- Basic Set
-
Heart Model for CTO
A heart model suitable for practical training in CAG and PCI under X-ray fluoroscopy in the cath lab. Stent deployment and guide wire manipulation can be simulated with this model.
Special Tank
Transparent tank that provides high visibility for catheter use simulation with or without X-ray fluoroscopy. No more than six liters of water are required for training.
Pulsatile Pump
Our uniquely-developed pulsatile pump can be set by 30-120 bpm (1600-4000ml/min in flow volume.). Realistic coronary images are obtained by particular patterns of the cylinder movement. The pump and tank are connected with easy-to-prepare connectors to avoid water leaks and time losses.
Tubes with Sheath
Special tubes with sheath.
Number of tubes: 2 ( 6･8Fr )
Lubricant
Special lubricant for coating the inner surface of the heart model.
1 fl. oz. ( lasts for 20 coatings )
Hoses
Hose with one-touch joint.
- Heart Model
-
Heart Model for CTO
A heart model suitable for practical training in CAG and PCI under X-ray fluoroscopy in the cath lab. Stent deployment and guide wire manipulation can be simulated with this model.
- Special Tank
-
Special Tank
Transparent tank that provides high visibility for catheter use simulation with or without X-ray fluoroscopy. No more than six liters of water are required for training.
- Pulsatile Pump
-
Pulsatile Pump
Our uniquely-developed pulsatile pump can be set by 30-120 bpm (1600-4000ml/min in flow volume.). Realistic coronary images are obtained by particular patterns of the cylinder movement. The pump and tank are connected with easy-to-prepare connectors to avoid water leaks and time losses.
- Tubes with Sheath
-
Tubes with Sheath
Special tubes with sheath.
Number of tubes: 2( 6･8Fr ) - Lubricant
-
Lubricant
Special lubricant for coating the inner surface of the heart model.
1 fl. oz. ( lasts for 20 coatings ) - Hoses
-
Hoses
Hose with one-touch joint.
Product specifications can be customized and are subject to change without notice.
Please contact JMC for details.
