PCI Model

Coronary

You can use the PCI Model to simulate many scenarios including simple CAG, PCI, Atherectomy, ACS, CTO, Bifucation strategy and some bail-out procedures under angiography visualized by camera and X-ray ﬂuorosopy.

This model allows trainees to understand the strategy behind dealing with various lesions, especially severe calcification. With calcified vessel parts, one can practice the debulking technique with Directional Coronary Atherectomy (DCA) devices.

Replaceable "Disease parts" according to the procedures

HEARTROID Coronary series have sockets for attaching "Disease parts". You can perform various training by replacing the "Disease parts" according to the purpose.

Disease parts [ detachable & disporsable ]

75% stenosis with soft plaque suitable for direct stenting.
75% stenosis with concentric calciﬁcation suitable for rotablation.
75% stenosis with eccentric calciation suitable for DCA.
For bail-out scenario “Coronary Perforation”

100% total occlusion
easy to pass

Compatible Operating Procedure

Model	CAG	PCI	CABG	CTO	BIF
Coronary angiography (CAG)	〇	〇	〇	〇	〇
PCI/CAG for CABG			〇
Thrombectomy for ACS		〇	〇	〇
IVUS / OCT imaging		〇	〇	〇	〇
Fractal Flow Reserve（FFR）		〇	〇	〇	〇
Stent deployment		〇	〇	〇	〇
Atherectomy（Rotablation/OA）		〇	〇	〇	〇
Directional coronary atherectomy （DCA）					〇
Bifurcation procedure KBT/Culotte & Crush stenting					〇
Coronary rupture bail-out		〇	〇	〇
Coiling for coronary perforation	〇	〇	〇	〇	〇
Chronic total occlusion（CTO）				〇

Recommended procedures

Stenting (Simple PCI procedure)

This scenario shows a simple PCI; that is balloon dilatation followed by stent deployment. Imaging catheters (IVUS, OCT, Angioscopy) and FFR are also applicable. Training under X-ray fluoroscopy is more beneficial.

Atherectomy (Debulking procedures)

This scenario allows trainees to understand the strategy behind dealing with various lesions, especially severe calcification. With calcified vessel parts, one can practice the debulking technique with Rotablator and Directional Coronary Atherectomy (DCA) devices. Training under X-ray fluoroscopy is more beneficial.

ACS (Thrombectomy, balloon and stenting)

This scenario facilitates emergent PCI strategy including thrombectomy followed by balloon dilatation and stent deployment. In successful case, you can see some thrombus in a syringe along with a nice final angiography.

Stenting (Simple PCI procedure): This scenario shows a simple PCI; that is balloon dilatation followed by stent deployment. Imaging catheters (IVUS, OCT, Angioscopy) and FFR are also applicable. Training under X-ray fluoroscopy is more beneficial.
Atherectomy (Debulking procedures): This scenario facilitates emergent PCI strategy including thrombectomy followed by balloon dilatation and stent deployment. In successful case, you can see some thrombus in a syringe along with a nice final angiography.
ACS (Thrombectomy, balloon and stenting): This scenario facilitates emergent PCI strategy including thrombectomy followed by balloon dilatation and stent deployment. In successful case, you can see some thrombus in a syringe along with a nice final angiography.

Basic Set

Heart Model for PCI

A heart model suitable for practical training in CAG and PCI under X-ray ﬂuoroscopy in the cath lab. Stent deployment and guide wire manipulation can be simulated with this model.

Special Tank

Transparent tank that provides high visibility for catheter use simulation with or without X-ray fluoroscopy. No more than six liters of water are required for training.

Pulsatile Pump

Our uniquely-developed pulsatile pump can be set by 30-120 bpm (1600-4000ml/min in flow volume.). Realistic coronary images are obtained by particular patterns of the cylinder movement. The pump and tank are connected with easy-to-prepare connectors to avoid water leaks and time losses.

Tubes with Sheath

Special tubes with sheath.
Number of tubes: 2 ( 6･8Fr )

Lubricant

Special lubricant for coating the inner surface of the heart model.
1 fl. oz. ( lasts for 20 coatings )

Hoses

Hose with one-touch joint.

Heart Model: Heart Model for PCI

A heart model suitable for practical training in CAG and PCI under X-ray ﬂuoroscopy in the cath lab. Stent deployment and guide wire manipulation can be simulated with this model.
Special Tank: Special Tank

Transparent tank that provides high visibility for catheter use simulation with or without X-ray fluoroscopy. No more than six liters of water are required for training.
Pulsatile Pump: Pulsatile Pump

Our uniquely-developed pulsatile pump can be set by 30-120 bpm (1600-4000ml/min in flow volume.). Realistic coronary images are obtained by particular patterns of the cylinder movement. The pump and tank are connected with easy-to-prepare connectors to avoid water leaks and time losses.
Tubes with Sheath: Tubes with Sheath

Special tubes with sheath.
Number of tubes: 2( 6･8Fr )
Lubricant: Lubricant

Special lubricant for coating the inner surface of the heart model.
1 fl. oz. ( lasts for 20 coatings )
Hoses: Hoses

Hose with one-touch joint.

Our products can be customized according to every customers' needs.
Please contact JMC for details.